• AQUA SOLUTIONS home page
  
• About us and our Laboratory Water Purification Products
• Lab Water and Water Purification Technology in General
  • Contact us
  • E-Mail us
• AQUA SOLUTIONS Product Lines
• Laboratory Water Purification Systems
• Systems designed for Hydrogen Generators
  • Replacement Cartridges for Barnstead Systems
  • Replacement Cartridges for Millipore® Systems
  • Water Purification Accessories
    
    

Dare to Compare - Click here to compare us with the competition - Dare to Compare

AQUA SOLUTIONS' Analytical Grade Type I DI Systems.

AQUA SOLUTIONS' Analytical Grade Type I DI Systems are available in Standard (2-3 Liters/Min) and High Flow/Capacity (4-10 Liters/Min) versions, for operation on either Ordinary Tap Water or Pretreated Water.

All AQUA SOLUTIONS' Analytical Grade Type I DI Systems produce purified water that meets or exceeds ASTM, CAP and NCCLS specifications for Type I reagent grade water.

Analytical Grade systems are available with or without a built-in ultraviolet (UV) sterilizer to control the growth of microorganisms within the system.

They are also available with built-in reverse osmosis pretreatment, in a single cabinet design measuring just 20" wide x 20" high x 12" deep!

Note: High Flow/Capacity Systems are not available for export. 

Features and Benefits:

18 megohm-cm Type I Reagent Grade Water at 50-100 ppb TOC

Continuous recirculation ensures superior water quality at all times

Highest flow rate (2-3 Liters per Minute) of any comparably sized system

Highest ion exchange capacity (2,000 to 4,000 Grains) of any comparable system

Built-in activated carbon prefilter reduces particulates & organics for longer DI module life

Digital, temperature-compensated resistivity monitor with red/green LED alarms

Teflon recirculating remote dispenser with 0.10 µm final filter capsule

System can be bench, shelf or wall-mounted at no extra charge

Two (2) year system warranty (US & Canada only)

Analytical Grade DI Systems:

• Model 2121A is designed for operation on pretreated water containing up to 17 ppm of total dissolved solids. It requires purification kit number 2613M1T.
  
  

• Model 2121AU is designed for operation on pretreated water containing up to 17 ppm of total dissolved solids. It includes a built-in ultraviolet (UV) sterilizer to control the growth of microorganisms within the system. It requires purification kit number 2613M1T.
  
  

• Model 2122A is designed for operation on ordinary tap water containing up to 170 ppm of total dissolved solids. It requires purification kit number 2613M2T.
  
  

• Model 2122AU is designed for operation on ordinary tap water containing up to 170 ppm of total dissolved solids. It includes a built-in ultraviolet (UV) sterilizer to control the growth of microorganisms within the system. It requires purification kit number 2613M2T.
  
  

• Model RODI-C-12A includes a built-in, 10Liter per Hour, reverse osmosis pretreatment system and is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It requires purification kit number 2613M1T-A.
  
  

• Model RODI-C-12AU includes a built-in, 10-Liter per Hour, reverse osmosis pretreatment system and is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It also includes a built-in ultraviolet (UV) sterilizer to control the growth of microorganisms within the system. It requires purification kit number 2613M1T-A.
  

High Flow/Capacity Analytical Grade DI Systems:

High flow/capacity analytical grade systems are similar to standard systems,
except that they have significantly higher flow rates (8-12 liters per minute)
and approximately three (3) times the ion exchange capacity of standard systems.

These systems are semi-custom designed for each application.
Contact your salesperson for more information.
High flow/capacity systems are not available for export.

© Copyright 2000 - 2007 AQUA SOLUTIONS, INC.